50CAL DJI Mavic Mini propellers 4726F low-noise (2 pairs, silver tips)
- For propellers
- 4x Propellers (2 pairs CC+CW) for DJI Mavic Mini from 50CAL
- Color: silver (tips)
- 12x Screw
- 1x Screwdriver
- Weight: 0.5 gram per blade (1 gram per propeller)
Note: Follow the installation instructions and use only the supplied screws . The propellers should rotate lightly and freely. Do not overtighten the screws. When in doubt: DO NOT fly, but call or email us .
Specifically designed for the Mavic Mini, these propellers provide a quieter flight and provide greater propulsion. Our house brand 50CAL stands for quality and reliability. Rest assured that our propellers meet 100% DJI brand quality standards and use of these propellers will not void any warranty. You will receive 8 Mavic Mini propellers (2 pairs) so you can go ahead, and cheap too!
IMPORTANT: Always check the propellers for damage before each flight. NEVER use damaged propellers, even if it seems minimal. Our private label propellers are 100% identical to original DJI propellers and therefore reliable.
Specifications DJI Mavic Mini Low-Noise Propellers
- Model: 4726F Low-Noise Propeller Diameter x Thread Pitch: 119.38 x 66.04 mm (4.7 x 2.6 in)
- Material: ABS
- Dimensions: 66 x 41 x 13mm
- Weight: 1 gram per propeller pair (2 blades of 0.5 gram each)
Be careful with imitation from China!
50CAL propellers meet DJI quality standards, but not all propellers. Don't risk your precious drone with camera because of a relatively small saving by ordering imitation propellers from China! Drone propellers run at very high speeds where incorrect design, imbalance and damage can lead to damage to the motors or even a crash of your expensive drone. That's not worth saving a few euros, is it? Make sure you buy propellers from a reliable party, such as DroneKenner , and you can be sure that you are using the right quality to fly your expensive drone.
- DJI Mavic Mini (1)
No reviews found